Oil Lines
Lines are styled after the originals but they ARE NOT
OEM replicas.
Steve (crabbysteve) and Jim (Darth) have decided to offer all the lines individually so that if someone needs a single line to get a bike going, they can. Or an entire set can be purchased.
At the present time, all lines have the ends for the serviceable valves only.
The serviceable check valve end has an O-ring seal instead of having to glue the
lines into the ends.
This means that you can simply remove your check valves and re-install them
anytime you wish.
The lines we now have fit the following bikes:
-
All H1’s (69-73 use your existing check valves)
-
All H1’s and KH500’s (74-76 you must obtain serviceable check valves)
-
All Early model H2’s (72-73 use your existing check valves)
- All Late model H2's (74-75
you must obtain
serviceable check valves)
Pricing on the new oil lines is as follows:
- Each
line is $55.00 each. This DOES NOT include ANY pump side banjo fittings or check
valves.
If you need pump side banjo fittings, they are $10.00 each.
- Pump side banjo fittings need to be supplied with each order so that the banjo
can be fitted to the line(s) prior to shipping.
We are now using stainless steel bands to replace the original ones on the pump
side banjo fittings.
-
Pricing for the Late H2 line (1 into 3) is $165.00...
$175.00 if you DO NOT supply a pump side banjo fitting.
You will need to obtain serviceable check valves.
If you have extra pump side banjos, we will offer $2.50 for each pump side banjo toward the cost of the line.
We
will also offer $8.00 for serviceable check valves and $5.00 for non-serviceable
check valves toward the cost of the line.
Contact:
jimshreve@dcsamerica.com
or
crabbycarpenter@sbcglobal.net